As low as $219.07/mo with or . (Pay in 4 interest-free payments)
S&S CYCLE 625G Gear Drive Camshaft Kit (Twin Cam) Upgrade your 95/96/103 and 110 cu. in. Twin Cam engine with the S&S CYCLE 625G Gear Drive Camshaft Kit . Designed for 10.0 to 10.75:1 compression , this precision kit improves valve timing accuracy and delivers strong performance in the mid-range. Performance & Key Benefits Strongest 3000–6000 rpm power band for responsive street performance. Improves timing accuracy by eliminating timing chain lash and loose stock chain drive fitment. Reverses rear cam rotation to provide additional cam lobe clearance, enabling higher cam lifts . Made in the USA . Fitment Notes (Read Before Install) Install requires material removal from the inner surface of the stock gear cover. Requires a hydraulic press and professional-level tools. High lift valve springs and adjustable pushrods are required. Replace camshaft bearings and gaskets during installation. Installer must verify coil bind , valve-to-valve clearance , and valve-to-piston clearance . Gear drives may produce additional valve train noise due to inherent characteristics. Kit Includes Camshafts Inner gear & outer drive gears Inner & outer bearings Gasket and instructions Specs (625 Series) Intake: 0.625" lift, 255° duration, 107.5° L/C, 20° open, 55° close Exhaust: 0.625" lift, 260° duration, 110° L/C, 20° open, 60° close Exhaust Lift at TDC: 0.184" | Intake Lift at TDC: 0.189" Type: Gear | Grind: 625 Series | Riding Style: Street Finish: Raw Weight: 6.1 lbs | Dimensions: 11.38" x 9.05" x 4.54"
For 95/96/103 and 110 cubic inch engines with compression ratios from 10.0 to 10.75:1
Strongest from 3000-6000 rpm
Increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes, as a result, higher cam lifts are possible
Material must be removed from inner surface of the stock gear cover to install
A hydraulic press and other professional level tools are required to install the kit
High lift valve springs and adjustable pushrods required
Camshaft bearings and gaskets must be replaced when installing new camshafts
Kit includes camshafts, inner gear, outer drive gears, inner, outer bearings, gasket and instructions
Made in the USA
Installer must check coil bind, valve to valve clearance and valve to piston clearance.
Due to inherent characteristics of gear drives, you may experience more valve train noise.
or 
. (Pay in 4 interest-free payments)
