As low as $60.40/mo with or . (Pay in 4 interest-free payments)
ANDREWS EV23 Cam (EVOLUTION Big Twin) — Intake/Exhaust Upgrade your ANDREWS EV23 Cam for sharper response and stronger pull on Big Twin touring and high-geared builds. Designed as a bolt-in cam , the EV23 “Evolution Big Twin” grind delivers crisp throttle manners and dependable performance where you ride—right from 1500 to 6000 rpm . Key Benefits 6000+ rpm capability with stock springs and no valve float (when properly set up). Bolt-in fit for heavier touring bikes and high-geared setups using 65-tooth rear pulleys . Works with stock springs ; compatible with carburetion or fuel injection . Crisp throttle response plus strong pulling power across the midrange. Performs well in higher altitudes . Made in the USA by ANDREWS. Specifications (Selected) Riding Style: Street Grind: EV23 | Type: Chain Intake Duration: 220° | Exhaust Duration: 228° Intake Lift: 0.498" | Exhaust Lift: 0.498" Intake Lobe Centerline: 100° | Exhaust Lobe Centerline: 106° Intake Open: 10° | Intake Close: 30° Exhaust Open: 40° | Exhaust Close: 8° Important: Before installation, verify coil bind , valve-to-valve clearance , and valve-to-piston clearance . Each • Weight: 2.19 lbs • Dimensions: 7.59" x 3.38" x 3.3"
Capable of 6000+ rpm with stock springs and no valve float
Bolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleys
Uses stock springs; works with carbs or fuel injection
Crisp throttle response and strong pulling power from 1500 to 6000 rpm
Works well in higher altitudes
Made in the USA
Must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
or 
. (Pay in 4 interest-free payments)
